Attach a section of 2.25" Inside Diameter SCAT hose to your AeroInjector intake bell (2.25" OD) for routing to your fresh air intake box*, air filter or carb heat box**.

*Caution: do not provide ram air intake to the AeroInjector as ram air velocities at different airspeeds will effect mixture.
**Carb heat is not required with the AeroInjector, however, some countries require the installation of carb heat, and some retrofit installations may be greatly simplified by retaining the carb heat box. To find out more about the AeroInjector's resistance to carb ice, view the AeroInjector Features table.

Use the AeroInjector Intake Flange Adapter (ACV-C10-10) to bolt the AeroInjector directly to your fresh air intake box* or carb heat box**. The ACV-C10-10 Intake Flange Adapter fits directly onto the standard AeroInjector intake bell and is a 3.125" (3 1/8") square flange with four 0.1875" (3/16") mounting pilot holes spaced 2.5" on-center.

ACV-C10-10 Intake Flange Adapter: $36.25
(You may choose whether to remote-mount the ACV-C10-30 Air Filter Assembly on the next page)

*Caution: do not provide ram air intake to the AeroInjector as ram air velocities at different airspeeds will effect mixture.
**Carb heat is not required with the AeroInjector, however, some countries require the installation of carb heat, and some retrofit installations may be greatly simplified by retaining the carb heat box. To find out more about the AeroInjector's resistance to carb ice, view the AeroInjector Features table.

Attach the AeroConversions Air Filter Assembly (ACV-C10-30) directly to the standard AeroInjector intake bell. The ACV-C10-30 is a simple and attractive Air Filter Assembly that uses inexpensive and readily available 4" round filter cores.

ACV-C10-30 Air Filter Assembly: $60.00